(480) 241-8408
Buy

See What's New here on the SYNLIME blog.


Ready Mix Stucco

Ready Mix Lime Replacements –

SYNLIME™ cement concentrates are patented Lime-Free™ powdered admixtures to be mixed with Portland Cement. These cement modifiers replace 100% of the lime used in stucco, plaster, grout, mortar, and other cementitious materials.

1 LB (1 bag) of SYNLIME™ admixture replaces 25 LBS of hydrated lime & produces significantly higher PSI levels. This revolutionary Lime-Free™ Technology is recognized as a GREEN Building Material and is biodegradable, non-caustic, non-corrosive, non-carcinogenic, and non-toxic. SYNLIME™ patented formulas contain no hydrated lime, no nitrates, no phosphates, no phenols, and no VOCs.

Synlime is a favorite among masonry crews and stucco applicators and can be found in stores across the US, Canada, Mexico, Australia and Western Europe.

See Immediate Benefits:

  • Superior Workability
  • Stronger PSI
  • Reduced Cost
  • Safe Certified
  • Green Product
  • 1:25 Compact Formula
CALL (480) 964-8200 in the US or email info@synlime.com
——————————————————————————-
James Molina
General Manager

Cell: 602-317-2551email: James@Synlime.com

——————————————————————————-

Lime-Free Cement by SynLime™

A new cement admixture has arrived that is putting the lime industry on it’s heels. SynLime™ is a cement modifier that completely removes the need for lime in cementitious materials. It’s a 100% complete lime replacement. Unlike the failed attempts of liquid additives or powdered lime reducers – SynLime™ is a COMPLETE lime replacement that also eliminates the need for other lime additives such as fly ash, clay & diatamaceous earth. SynLime™ won’t reduce workability. It makes the mix fluffy, sticky & very workable!

Removing lime and other toxic materials from stucco, grout, plaster, and mortar is making a huge impact on worker safety.  The risks associated with lime can now be put to rest.  Workers won’t need to tolerate skin burns, eye irritation, and respiratory problems common with lime.  SynLime™ admixtures have been engineered to eliminate the toxic effects associated with lime.

SynLime™ is a dry, powdered admixture that increases PSI and addresses the cracking issue with lime based stuccos & grouts.  Home builders and contractors now have a new best friend that is saving them time, money, and reducing warranty issues on the back end.

SynLime™ recently took Best of Show @ World of Concrete in Las Vegas, NV and received top honors from Construction International.

Synlime and Large Stucco Jobs

June 28, 2012
Flagstaff, AZ

Apodaca Wall Systems Headquartered in Phoenix, Arizona, recently began using Synlime on a large multi-unit / multi-story condo stucco job in Flagstaff, Arizona (10 units and 1 clubhouse).  Traditionally a user of lime in their stucco mixes, Apodaca had heard of the amazing benefits of Synlime and wanted to give it a try.  The results were amazing and their lead project site manager commented on how Synlime exceeded their expectations in the following areas:

Stucco with Synlime

  •   Less fall-off.  The mix stuck better, resulting in less sluff.
  •   Virtually no cracking, compared to traditional lime mixes.
  •   Workers commented how Synlime didn’t make their skin burn.
  •   Faster cure allowed for less time between coats.
  •   No paint burn-out & better finished product.
  •   “Synlime has exceeded our expectations and we will continue using  on upcoming jobs.”

Lime Replacement

Dry / Powdered / Lime-Free™ Admixtures

SYNLIME™ cement concentrates are patented Lime-Free™ powdered admixtures to be mixed with Portland Cement. These cement modifiers replace 100% of the lime used in stucco, plaster, grout, mortar, and other cementitious materials

1 LB (1 bag) of SYNLIME™ admixture replaces 25 LBS of hydrated lime & produces significantly higher PSI levels. This revolutionary Lime-Free™ Technology is recognized as a GREEN Building Material and is biodegradable, non-caustic, non-corrosive, non-carcinogenic, and non-toxic. SYNLIME™ patented formulas contain no hydrated lime, no nitrates, no phosphates, no phenols, and no VOCs.

APODACA in Flagstaff, Arizona

The SYNLIME™ Difference:

  • Superior Workability
  • Stronger PSI
  • Reduced Cost
  • Safe Certified
  • Green Product
  • 1:25 Compact Formula

 CALL (480) 964-8200

Masonry Bricks

Synlime can be used in both the manufacturing of masonry bricks, as well as masonry brick mortar.

SYNLIME™ cement concentrates are patented Lime-Free™ dry powdered admixtures to be mixed with Portland Cement. These cement modifiers replace 100% of the lime used in stucco, plaster, grout, mortar, and other cementitious materials.  1 LB (1 bag) of SYNLIME™ admixture replaces 25 LBS of hydrated lime & produces significantly higher PSI levels.  Below is a more complete list of products made with SYNLIME™:

  • Stucco
  • Mortar
  • Grout
  • Cement
  • Plaster
  • Masonry Bricks
  • Masonry Blocks
  • Pavers
  • Bagged product mixes
  • and much more…

Masonry Bricks

Synlime will make your masonry bricks harder and your masonry mix more fluffy, sticky & workable… Everytime!

masonry mud

CALL (480) 964-8200 for more details

Synlime Announces New Pricing

Admix International recently released new 2012 retail pricing for their flagship Lime-Free admixture SYNLIME.  The price just keeps getting better!  Now available to the public at large, consumers can purchase Synlime in quantities of 10+ or 50+ pounds.  Resellers and Distributors are encouraged to contact the manufacturer directly for discount and bulk pricing (from $2.50/LB).  There has never been a better time to stock up on Synlime Admixtures – winner of the 2011 “Most Innovative New Product” (MIP) Award @ World of Concrete & Masonry.